A: Multiple Flash Photography With Slave C Added - Canon Macro Twin Light MT-26EX-RT Instruction Manual

a: Multiple Flash Photography with
Slave C Added
C
88
This section describes multiple flash
shooting with slave C added to flash
heads A and B.
Set the flash mode to <a>.
1
Press the <E> button.
Turn <9>, select <Q>, then
press <8>.
Set <l> and <6>.
2
Press the <,> button.
Turn <9>, select <W>, then
press <8>.
Check the transmission channel.
3
If the channels of the master unit and
slave unit are different, set them to
the same number (p.86).
Set slave C and position it.
4
Set the firing group of the slave unit to
C, and position the unit within the
range shown on page 82.