Table of Contents
Advertisement
2
With the Philips Smart Home app, add the device to the Bridge (see 'Join
your Smart Home network' on page 11).
Restore factory settings
Restore factory settings when:
•
you want to connect your device to another Bridge.
On the sensor, do the following:
1
Delete the device from the Bridge (see 'Delete the device' on page 25).
2
Open the battery door.
3
Push to close the battery door. Don't release the door until the status
indicator turns from amber to red.
4
With the Philips Smart Home app, add the device to the Bridge (see 'Join
your Smart Home network' on page 11).
On the Intelligent switch, do the following:
1
Delete the device from the Bridge (see 'Delete the device' on page 25).
2
Press and hold the Setup button until the status indicator turns from amber
to red.
3
With the Philips Smart Home app, add the device to the Bridge (see 'Join
your Smart Home network' on page 11).
EN
16
Advertisement
Table of Contents
