Reset
Reset network connection
Reset the network connection when:
•
a device re-joins the Smart Home network after the batteries are replaced.
•
there are connection problems with the Smart Home network.
Indicator
Status of the device
flashing red
Network connection lost
On the sensor, do the following:
1
Open the battery door.
2
Push to close the battery door. Release the door when the status indicator
flashes in amber.
3
With the Philips Smart Home app, add the device to the Bridge (see 'Join
your Smart Home network' on page 11).
On the Intelligent switch, do the following:
1
Press and hold the Setup button until the status indicator flashes in amber.
EN
15