Axis 225FD User Manual page 58

AXIS 225FD - Technical Specifications
58
Item
Casing
Processors and memory
Power
Operating conditions
Installation, management and
maintenance
Video access from
Web browser
Minimum web browsing
requirements
System integration support
Specification
Metal base and polycarbonate clear dome glass
Impact-resistant 1000 kg (2200 lbs)
IP66 environmental protection
Tamper-proof mounting
CPU: ETRAX 100LX 32bit
Video processing and compression: ARTPEC-2
Memory: 32 MB RAM, 8 MB Flash
Battery backed up real-time clock
• Camera, heater and fan:
12 V DC, max 20 W
24 V AC, max 25 VA
• Camera and fan:
9-24 V DC, max 5.5 W
10-24 V AC, max 8 VA
Power over Ethernet (IEEE 802.3af) with power classification (Class 2)
• Heater only: (can be powered separately when camera and fan are powered over
Ethernet)
12 V DC, max 15 W
24 V AC, max 17 VA
5 - 50 ºC (41 - 122 ºF)
With heater: -20 - 50 ºC (-4 - 122 ºF)
Humidity 20 - 80% RH (non condensing)
Alarm is activated when temperature is below or above limits
AXIS Camera Management tool on CD and web-based configuration
Configuration of backup and restore
Firmware upgrades over HTTP or FTP, firmware available at www.axis.com
Camera live view,
Video recording to file (ASF),
Sequence tour for up to 20 Axis video sources,
Customizable HTML pages
Pentium III CPU 500 MHz or higher, or equivalent AMD,128 MB RAM, AGP
graphics card 32 MB RAM, Direct Draw
Windows XP, 2000, DirectX 9.0 or later Internet Explorer 6.x or later
For other operating systems and browsers see www.axis.com/techsup
Open API for software integration available at www.axis.com, including AXIS
VAPIX API, AXIS Media Control SDK, event trigger data in video stream and access
to serial port peripherals over TCP.
Quality of Service (QoS) Layer 3, DiffServ Model.
Embedded operating system: Linux