To Set An Alarm Time - Casio 2981 User Manual

To set an alarm time

(2 seconds)
3. Use the E (+) and B (–) buttons to change the hour setting.
• Holding down either button changes the setting at high speed.
• When setting the hour, make sure you specify AM or PM (P)
correctly when using 12-hour timekeeping, or that you specify the
correct 24-hour time. The same 12-hour/24-hour format you select
for the Timekeeping Mode time (page E-50) is also applied in the
Alarm Mode.
• The timekeeping system (12-hour or 24-hour) used in the Alarm
Mode is the same one you select for the Timekeeping Mode (page
E-50).
4. Press the D button to move the flashing to the minutes.
5. Use the E (+) and B (–) buttons to change the minute setting within
the range of 0 to 59.
• Holding down either button changes the setting at high speed.
6. After all the settings are the way you want, press the A button to exit
the setting screen.
• The watch also will exit the setting screen automatically if you do
not perform any operation for about two or three minutes.
1. In the Alarm Mode, display the screen of
the alarm whose setting you want to
change.
2. Hold down the A button for about two
seconds until the hour digits of the
current alarm time start to flash. This is
the setting screen.
• Displaying the setting screen also
turns on the alarm automatically and
causes the alarm on indicator to
appear on the screen.
E-48