Configure; Environment - Delta InsightPower SNMP IPv6 User Manual

Configure

Go to Monitor → History → Configure to clear the history data and event log.
You can also assign the Save Data Interval.
Clear History Data: Empty the history data log only.
z
z
Clear Event Log: Empty the event log only.
z
z
Save Data Interval: The time interval after which an event/ data entry is
z
z
recorded.

5-1-3 Environment

Only when an EnviroProbe is used can the Environment page show up. Please note
that the SNMP IPv6's DIP switch 1 should be set to the ON position and DIP switch 2
should be set to the OFF position when you use an EnviroProbe.
The Environment page includes Information and Configuration these two items.
You can monitor and set up your EnviroProbe via this Environment page. For Envi-
roProbe information, please refer to the Installation Guide included in the package
of the EnviroProbe.
InsightPower SNMP IPv6 for UPS
http://192.168.1.100/
3 0