Chapter 4 : System Configurations; Configuring Via Insightpower Snmp Ipv6 For Ups Web - Delta InsightPower SNMP IPv6 User Manual

Chapter 4 : System Configurations

There are different ways you can configure your SNMP IPv6. If a network connection
is available at your location, the following methods can be used:
Web-based interface : The InsightPower SNMP IPv6 for UPS Web offers com-
z
z
prehensive system management and monitoring. Please refer to Chapter 5:
InsightPower SNMP IPv6 for UPS Web.
EzSetting : Use the provided program EzSetting to quickly set up your SNMP
z
z
IPv6. Please refer to 4-2 Configuring with EzSetting.
Telnet mode : Configure your SNMP IPv6 in text mode. Please refer to 4-3 Con-
z
z
figuring via Telnet.
The above-mentioned methods require network connection. If not available, you can
use direct COM port connection to set up your SNMP IPv6. Please see 4-4 Configur-
ing through COM Port.
NOTE
1. To ensure system security, it is highly recommended that you change your
account and password after the first login.
2. If you have multiple SNMP IPv6 units installed in your network, we highly
suggest that you change the SNMP IPv6's default Host Name to avoid con-
flicts. Also, it is recommended that you disable BOOTP/ DHCP and manu-
ally assign a valid static IP address to the SNMP IPv6.

Configuring via InsightPower SNMP IPv6 for UPS Web

4-1
To set up the SNMP IPv6 via your web browser, please follow the instructions be-
low:
Step 1
Use a CAT5 network cable to connect the SNMP IPv6's Network port to
the network. Launch your web browser. In the address bar, enter the
SNMP IPv6's default Host Name InsightPower, or default IP address
192.168.1.100. If you are unable to connect, please see Chapter 7 : Trou-
bleshooting Q6.
Chapter 4
11
System Configurations