PIAGGIO Beverly Tourer 300ie User Manual page 48

1. Set the vehicle upright on the stand and remove the cover by undoing screw «A».
2. Remove the expansion tank cover «B» by turning it anticlockwise.
3. Look inside the expansion tank and check that fluid level is always between the
«MIN» and «MAX» levels.
4. Top-up the fluid when it is close to the minimum mark.
If the level is not correct, proceed to top-up when the engine is cold. If the coolant
needs to be topped up frequently or the expansion tank is completely dry, check the
cooling system to find the cause of the problem. It is therefore essential to have the
cooling system checked at an Authorised Service Centre.
03_14
Replace coolant as indicated in the scheduled maintenance table. Take your vehicle
to an Authorised Service Centre for this operation.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
03_15
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RIDING, IT IS IMPORTANT
TO MAKE SURE THAT THE LEVEL DOES NOT EXCEED THE REFERENCE
TONGUE TOO MUCH.
TO ENSURE CORRECT ENGINE OPERATION, KEEP THE RADIATOR GRILLE
CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL
03_16
coolant
48