Page 2
B-COCKPiT BC-18 Operating Manual Important Information Regarding Safe Operations: 1. Turn OFF the main power of the E-bike before plug / unplug the HMI, or it may lead to permanent electrical damage to the HMI and the E-bike. 2. Do Not overtighten the bolts when installing the HMI to the E-bike, a torque of 0.2N.m is sufficient to secure the HMI to the handlebar, overtightening the bolts...
B-COCKPiT BC-18 Operating Manual Frequent Asked Questions Q: What riding modes does B-COCKPiT Support? A: B-COCKPiT Supports up to 9 levels of pedal assist, as well as level 0 (zero assist), this can be customized base on customer requirements. 6km/h Startup/Push assist mode is supported by default, and is activated by pressing and holding the "-"...
B-COCKPiT BC-18 Operating Manual Product Description and Specifications Parts Description 1.77” 160x128 color TFT display USB Port with protective cap Mounting Bracket “+” Button “i” Display function button “-” Button Technical Data Rated operating voltage 24V / 36V / 48 V DC...
B-COCKPiT BC-18 Operating Manual Dimensions and Features Core Data Displayed Information Display Type 160x128 Color TFT LCD Real Time Speed Real Time Motor Power Digital and Graphical Nominal Voltage 24 / 36 / 48 VDC Battery Level Graphical Supported Modes 0 - N with Walk Assist...
B-COCKPiT BC-18 Operating Manual Installation Install the BC-18 Unit 1. Use M3 Hex Socket Screw 1 to secure the mounting bracket to the left side of the handle bar. Tightening torque: 0.2N.m. Do Not Overtighten or it may cause damage to the HMI ...
B-COCKPiT BC-18 Operating Manual System Operations Initial Operations Set System Time 1. Press and hold “+” and “-” together for 2 seconds to enter the system menu. 2. Use “+” / “-” to navigate to the “Display Setting” line and press “i”.
B-COCKPiT BC-18 Operating Manual Connect to Bikewise APP 1. Press and hold “+” and “-” together for 2 seconds to enter the system menu. 2. Use “+” / “-” to navigate to the “Connect To APP” line and press “i”.
B-COCKPiT BC-18 Operating Manual Meter Interface Meter Interface is the default interface of B-COCKPiT. Status Bar Real-time Speed Motor Power *Info Display Area Assist Level Meter Interface * Various information can be shown in the “Info Display” area Lights Indicator...
Page 11
B-COCKPiT BC-18 Operating Manual Info Display Area In Meter Interface, short press “i” to cycle through various riding and e-bike information Trip Distance Total Distance Trip Max Speed Trip Average Speed Real-time Motor Output Ride Time Today Calories Burnt Today * Ride time will pause if the e-bike is not moving, and will reset at 00:00 every day.
B-COCKPiT BC-18 Operating Manual Menu Interface In Meter Interface, Press and hold “+” and “-” together for 2 seconds to enter the system menu. The Menu is only accessible when the E-bike is stationary. Menu Map Reset Trip* Display Setting Metric –...
B-COCKPiT BC-18 Operating Manual Maintenance and Service Maintenance and Cleaning Do not immerse the unit in water or clean it with pressurized water. Clean the unit using a soft cloth dampened only with water. Do not use any detergents.