Control Panel; Control Description - Westinghouse WSF67251 User Manual

CONTROL PANEL

4 5
1
11
12
13 14
1
On/off button
2 Door handle
3
Start/standby button
4
FlexZone button
5 Program button
6 Tablet detergent button
7
Hygiene button
8 Delay button
9 Dry Plus button
10
Program displays
11
FlexZone indicator
12 Tablet detergent indicator
6
CONTROL PANEL
6 2 7 8 9
3
10
18
19
15 16 17
13
Rinse aid level warning display
14 Remaining time/delay
15
Progress indicator
• Washing phase
• Rinsing phase
• Drying phase
• End indicator
16 Delay indicator
17
Child Lock indicator
18
Hygiene indicator
19 Dry Plus indicator
CONTROL DESCRIPTIONS
Power on/off button
1
When you press the on/off button, the machine is
switched on and the display shows the Eco 50 program,
the dishwasher is off when the LEDs on the display are off.
Door handle
2
Use the door handle to open/close the door of your
dishwasher.
Start/Standby button
3
When the start/standby button is pressed, the program
selected with the program button will start and the
progress indicator display will show the washing image
. The progress indicator display will show the
15
washing phases.
15
FlexZone button
4
The FlexZone function allows dishes to be washed in the
upper basket only, lower basket only or both upper and
lower baskets to cater for every load size.
If you do not have a full load of dishes in your machine
you can also activate the FlexZone function for some
programs. If you have dishes in both baskets, press
the FlexZone button and select the position in which both
lamps are highlighted.
If you have dishes only in the upper basket, press the
FlexZone button and select the position in which the
upper image is illuminated. Thus, washing up shall be
done only on the upper basket of your machine.
If you have dishes only in the lower basket, press the
½ key and select the position in which the lower image is
illuminated. Thus, washing up shall be done only on the
lower basket of your machine. When using this feature,
make sure that there are no dishes in the upper basket.
Program button
5
Select the appropriate washing program from the display
using the program button. 10
Tablet detergent button
6
Press the tablet detergent button whenever using tablets.
If this button is active for the program you have selected,
indicator will be illuminated on the display.
12
Dry Plus button
7
Using this button, you may add extra drying to the
program you have selected.
When you select the extra drying function, indicator
19 is illuminated on the display. Using this function, you
may add more drying steps to the program you
have selected and consequently obtain drier dishes.
Delay button
8
Once a program is selected and before the program
starts, you may adjust the delay time by pressing the
delay button. The program start can be delayed from 1-24
hours. When you press the delay button, indicator 16 will
be illuminated on the display.
Hygiene button
7
Select this button to obtain extra hygiene, this will alter
the water temperature and washing time of the program
you have selected. When you select the hygiene function,
indicator will be illuminated on the display.
18
Rinse aid level warning display
13
In order to understand whether the rinse agent in your
machine is sufficient or not, please check the rinse agent
level warning display. If this display is illuminated, fill the
rinse agent section.
Remaining time delay display
14
The remaining time display shows the duration of the
programs and the remaining time while the program is
in operation. If you have selected a delay time, the
display will count down the delay time and then the
program time.
Use of child lock
In order to activate the child lock, press both "tablet
detergent" and "FlexZone" buttons at the same time for 3
seconds. In the meantime, you will see "CL" for 2 seconds
on the Remaining time display. In order to deactivate,
press both "tablet" and "FlexZone" buttons at the same
time for 3 seconds. "CL" will flash two times.
CONTROL DESCRIPTIONS
7