Dirt Devil DDU01-E01-P01 User Manual page 17

HOW TO REPLACE THE BELT AND BRUSHBAR
CONTINUED...
4. Slide belt onto
motorshaft.
7. Reattach nozzle guard.
CAUTION: To reduce the risk of injury from moving parts - Unplug vacuum before servicing.
5. Place new belt in
area of brushbar
without bristles.
SLOTS
SLOTS SLOTS
TABS
TABS
TABS
SLOTS
SLOTS
SLOTS
TABS
TABS
TABS
8. Secure by aligning
the three tabs in the
base slots.
6. With new belt in place,
pull and slide brushbar
into nozzle making sure
that the brushbar end
caps are in the correct
orientation. Rotate
brushbar manually to
make sure belt is
properly aligned.
five (5)
five (5)
9. Replace all five screws
to secure nozzle guard.
five (5)
five (5)
five (5)
five (5)
7 13 7
17