Listening To Fm Radio; To Select The Desired Radio Station; Tuning In To A Preset Station - Samsung MCD-HF200 Instruction Manual

MCD-HF200(GB) 3/5/03 3:15 PM

Listening to FM Radio

To select the desired radio station

1
Press and hold the FM button.
• The frequency of the received
station appears on the display of
the remote control.
• Press the button to select either
Mono or Stereo.
2
Use the Iî , ïI buttons to tune in to a desired radio station.
Automatic Tuning
Press and hold the Iî or ïI.
• Automatically scans and tunes to the next
avaiable station.
Manual Tuning
Press the Iî or ïI .
• Press the button repeatedly to tune in the
desired station manually.
3
To turn off the radio, press
and hold the Stop ( ) button.
• Press the Play/Pause ( √» )
button to switch to CD mode.
Note • The reception may not be clear in a weak signal area.
• If the reception of an FM station transmitting in stereo is weak, press the
ST/MO button to switch to the mono mode for improved sound quality.
29
Page 29
ST
STEREO
91.9
MHZ
ST
STEREO
87.9
MHZ
ST
STEREO
89.9
MHZ
Presetting Stations in Memory
EXAMPLE: Storing an FM station at 89.1 MHz into preset number 2
1
Tune to a station of 89.1 MHz and
then press the PROG./NAVI. button.
2 Press Iî or ïI to select the preset
"MEMORY 2".
• Each time the button is pressed a higher or
lower preset number is selected.
• Start with the preset station number 1 if you
are presetting stations for the first time since
the purchase of the product.
3
Press the PROG./NAVI. button again to
store the selected station.
• The preset number disappears, indicating
that the station has been stored.
• Repeat steps 1 to 3 to change the station or
store other stations. You can preset up to 15
stations.

Tuning in to a Preset Station

1
If you have already stored
stations into memory,
press the Preset button.
• "Preset" and the station frequency stored
under that preset number appear on the display.
2
Press Iî or ïI to select the
desired preset number.
• "Preset" remains, and the frequencies
of the preset stations are displayed in turn.
You can either manually
*
(Memory function)
or automatically preset
and store FM stations.
STEREO
89.1
MHZ
Memory
STEREO
2 89.1
MHZ
STEREO
89.1
MHZ
Preset
STEREO
1 91.9
MHZ
Preset
STEREO
3 93.5
MHZ
30