Motion Detection Recording - Q-See QSTD2404 User Manual

3.3.4 Motion Detection Recording

This unit supports recording channels and PTZ linking. This means it will
record on any cameras, or trigger any speed dome to go to presets or do
auto cruise once motion is detected.
Enter MOTION configuration and select camera or channel
STEP1
Put check mark in Enable Detection box first, and then enter Area
STEP2
to set Sensitivity and detection Area. In detection area, red means not
sensitive, which will not trigger recording, transparent means available or will
trigger recording, see Fig 3.10 Motion Detection Area Setup. Sense the
sensitivity can be influenced by the color and time (day or night), users can
adjust its value according to the present conditions.
Enter Trigger configuration, see Fig 3.11 Trigger Setup
STEP3
QSTD2400 Series DVR User's Manual
Fig 3.10 Motion Detection Setup
Fig 3.10 Motion Detection Area Setup
Fig 3.11 Trigger Setup
17