Step 1 Detach 11P cable at connector (CN5802) on SMPS
P.C.B..
Step 2 Detach 2P cable at connector (CN2810) on SMPS
P.C.B..
Step 3 Remove 2 screws on Main P.C.B..
Step 4 Remove 4 screws at rear panel.
Step 5 Remove Main P.C.B. according to the arrow shown.
9.23. Disassembly of SMPS P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 7) of Item 9.4
• Follow the (Step 1) to (Step 5) of Item 9.19
77