4.3.4 Reversing Lamps, Rear View
Camera, Reversing Alarm (Manual
Transmission)
The reverse lamps are activated by the reverse
switch on the transmission, through connector
C169 to the Central Junction Box where the signal
is sensed. A marginal increase in current (via a
relay or buffered electrical input) is permissible
to provide power to a rear-view camera, auxiliary
reverse lighting, or an audible warning device.
Item
1
Low beam
2
High beam
F20
10A
F75
15A
F76
10A
FORD RANGER 2015
Description
Lighting Fuses
Headlamp
Front fog lamp
Reversing lamp
4.3.5 Additional External Lamps -
(Low Level Vehicles Only)
When installing auxiliary tail lamps, Ford
recommends that power is provided via the trailer
plug control module and associated circuitry.
Refer to Trailer Towing for additional information.
For all other additional exterior lamps, power
must be taken through an auxiliary fuse box with
a suitable switch and / or relay as required.
WARNING: Directly splicing into the
vehicle wiring in order to install auxiliary
lamps or other electrical devices may
overload the system and impact the
operation of other vehicle systems.
When installing auxiliary driving lights, power can
be provided via a relay energised by the headlamp
feed.
Date of Publication: 02/2017