HP 2520-8 Configuration Manual page 31

Switch(config)# show ipv6
Internet (IPv6) Service
IPv6 Routing
Default Gateway : 10.0.9.80
ND DAD
DAD Attempts
Vlan Name
IPv6 Status
Vlan Name
IPv6 Status
Address |
Origin | IPv6 Address/Prefix Length
---------- + ------------------------------------------- -----------
autoconfig | 2620:0:a03:e102::127/64
dhcp | 2620:0:a03:e102:212:79ff:fe88:a100/64
manual | fe80::127/64
Figure 1-1. Example of Show IPv6 Command Output
: Disabled
: Enabled
: 3
: DEFAULT_VLAN
: Disabled
: VLAN10
: Enabled
For example, Figure 1-2 shows the output on a switch having IPv6 enabled on
Syntax: show ipv6 nd
Displays the current IPv6 neighbor discovery settings on the
configured VLAN interfaces.
VLANs 1 and 22.
Switch# show ipv6 nd
IPV6 Neighbor Discovery Configuration
VLAN ID DAD
Attempts
------- -------- ---------- -----------
1 3
22 3
Figure 1-2. Example of Show IPv6 nd Output with Default settings
View the Current IPv6 Addressing Configuration
RCH Time NS Interval
(msecs) (msecs)
30000 1000
30000 1000
IPv6 Addressing Configuration
Address
Status
preferred
preferred
preferred
1-19