Standard Accessories; Battery Removal/Installation; Optional Accessories - Hitachi WH 14DBAL2 Handling Instructions Manual

English
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the accessories listed in the
table below.
1 Charger ........................................................................ 1
WH14DBAL2
2 Battery ......................................................................... 2
WH18DBAL2
WR14DBAL2
3 Plastic case .................................................................. 1
WR18DBAL2
4 Battery cover ............................................................... 1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES

(Sold separately)
Battery
(BSL1430, BSL1440, BSL1450)
Optional accessories are subject to change without notice.
Before
charging
While
charging
Charging
complete
The pilot
lamp lights
or blinks.
Charging
impossible
Overheat
standby
(2) Regarding the temperatures of the rechargeable battery
The temperatures for rechargeable batteries are as shown in Table 2, and
batteries that have become hot should be cooled for a while before being
recharged.
11
UC18YRSL UC18YFSL
14.4 V – 18 V
0.6 kg 0.5 kg
(BSL1830, BSL1840, BSL1850)
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5 seconds.
Blinks
(off for 0.5 seconds)
(red)
Lights continuously
Lights
(red)
Lights for 0.5 seconds. Does not light for 0.5 seconds.
Blinks
(off for 0.5 seconds)
(red)
Lights for 0.1 seconds. Does not light for 0.1 seconds.
Flickers
(off for 0.1 seconds)
(red)
Lights
Lights continuously
(green)
〈UC18YRSL〉
Blinks Lights for 1 seconds. Does not light for 0.5 seconds.
(off for 0.5 seconds)
(red)
〈UC18YFSL〉
APPLICATION
< WH14DBAL2 / WH18DBAL2 >
Driving and removing of machine screws, wood screws, tapping screws,
etc.
< WR14DBAL2 / WR18DBAL2 >
Tightening and loosening of all types of bolts and nuts, used for securing
structural items

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to remove the battery (see
Fig. 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's pilot lamp will blink in red.
(At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger, as shown in Fig. 3, 4.
3. Charging
When inserting a battery in the charger, charging will commence and the
pilot lamp will light continuously in red.
When the battery becomes fully recharged, the pilot lamp will blink in red.
(At 1-second intervals) (See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in Table 1, according to
the condition of the charger or the rechargeable battery.
Table 1
Table 2 Recharging ranges of batteries
Rechargeable batteries
BSL1430, BSL1440, BSL1450
BSL1830, BSL1840, BSL1850
Malfunction in the battery or the
charger
Battery overheated.
Unable to charge. (Charging will
commence when battery cools)
Temperatures at which the
battery can be recharged
0°C – 50°C