Precautions Regarding The Dust- Resistance And Water-Proofing Functions; Specifications - Hitachi WH 14DBAL2 Handling Instructions Manual

CAUTION
1. If liquid leaking from the battery gets into your eyes, do not rub your
eyes and wash them well with fresh clean water such as tap water
and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well with clean water
such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor, deformation, and/or
other irregularities when using the battery for the first time, do not
use and return it to your supplier or vendor.
PRECAUTIONS REGARDING THE DUST-
RESISTANCE AND WATER-PROOFING
FUNCTIONS
This product conforms to IP56 protection class ratings (dust-resistance and water-proofing) for electrical equipment as stipulated by the international IEC regulations.
(Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.)
[Descriptions of IP Codes]
IP56
Protection rating for water penetration
Must be no adverse effects on the equipment when sprayed with powerful jets of water from all directions (water-proofed.)
(100 L of water per minute sprayed for approximately three minutes from a distance of approximately three meters with the use of a spray nozzle with a
diameter of 12.5 mm.)
Protection rating for external assault by solid objects
Dust that may cause adverse effects on the equipment must not be able to enter (dust-resistance.)
(The equipment to be left non-operable in a test chamber in which particles of talcum powder with a diameter of less than 75
the use of an agitation pump at a rate of 2 kg per cubic meter for eight hours.)
The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment
in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater.

SPECIFICATIONS

POWER TOOL
Model
Voltage
High mode
Medium mode
No-load speed
Low 2 mode
Low 1 mode
Ordinary bolt
Capacity
High tension bolt
Tightening torque (Maximum)
Rechargeable battery
Weight
Model
Voltage
High mode
Medium mode
No-load speed
Low 2 mode
Low 1 mode
Ordinary bolt
Capacity
High tension bolt
Tightening torque (Maximum)
Rechargeable battery
Weight
WH14DBAL2
14.4 V
–1
0 – 2800 min
–1
0 – 2200 min
–1
0 – 1500 min
–1
0 – 900 min
160 N·m
BSL1430: Li-ion
14.4 V (3.0 Ah 8 cells) 14.4 V (4.0 Ah 8 cells)
1.4 kg
WR14DBAL2
14.4 V
–1
0 – 2800 min
–1
0 – 2200 min
–1
0 – 1500 min
–1
0 – 900 min
165 N·m
BSL1430: Li-ion BSL1440: Li-ion
14.4 V (3.0 Ah 8 cells) 14.4 V (4.0 Ah 8 cells) 14.4 V (5.0 Ah 8 cells) 18 V (3.0 Ah 10 cells) 18 V (4.0 Ah 10 cells)
1.4 kg
WARNING
If an electrically conductive foreign object enters the terminals of the lithium ion
battery, a short-circuit may occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails, steel wire, copper
wire or other wire in the storage case.
Either install the battery in the power tool or store by securely pressing
into the battery cover until the ventilation holes are concealed to
prevent short-circuits (See Fig. 1).
M5 – M14
M5 – M12
BSL1440: Li-ion BSL1830: Li-ion
18 V (3.0 Ah 10 cells)
M6 – M16
M6 – M12
BSL1450: Li-ion BSL1830: Li-ion
English
are floating in the air with
WH18DBAL2
18 V
–1
0 – 2900 min
–1
0 – 2200 min
–1
0 – 1500 min
–1
0 – 900 min
160 N·m
BSL1840: Li-ion
18 V (4.0 Ah 10 cells)
1.5 kg
WR18DBAL2
18 V
–1
0 – 2900 min
–1
0 – 2200 min
–1
0 – 1500 min
–1
0 – 900 min
165 N·m
BSL1840: Li-ion BSL1850: Li-ion
18 V (5.0 Ah 10 cells)
1.5 kg
10