Maintenance; Battery - GlucoRx TD-4268 Owner's Manual

MAINTENANCE

Battery

Your meter comes with two 1.5V AAA size alkaline batteries.
Low Battery Signal
The meter will display one of the messages below to alert you when
the meter power is getting low.
1. The " " symbol appears along with display messages: The
meter is functional and the result remains accurate, but it is time to
change the batteries.
2. The " " symbol appears with E-b, Error and low: The power
is not enough to do a test. Please change the batteries immediately.
Replacing the Battery (n)
To replace the batteries, make sure the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with two 1.5V AAA size
alkaline batteries.
3. Close the battery cover. If the batteries are inserted correctly, you
will hear a "beep" afterwards.
NOTE:
• Replacing the batteries does not affect the test results stored in memory.
• As with all small items, these batteries should be kept away from
children. If swallowed, promptly seek medical assistance.
• Batteries may leak chemicals if unused for a long time. Remove the
batteries if you are not going to use the device for an extended period (i.e.,
3 months or more).
• Properly dispose of the batteries according to your local environmental
regulations.
21