Maintenance Battery; Replacing The Battery - GlucoRx TD-4277 Owner's Manual

MAINTENANCE
Battery
Your meter comes with two 1.5V AAA size alkaline batteries.
Low Battery Signal
The meter will display one of the below messages to alert you when
the meter power is getting low.
1. The symbol appears along with display
messages: The meter is functional and the result
remains accurate, but it is time to change the
batteries.
2. The symbol appears with E-b, error
message and low:
The power is not enough to do a test. Please change
the batteries immediately.

Replacing the Battery

To replace the battery, make sure that the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with two 1.5V AAA alkaline
batteries.
3. Close the battery cover. If the batteries are inserted correctly, you will
hear a "beep" afterwards.
29