Fishman LDS9000 Administrator's Manual page 26

9.3.1
Prime Only – Serial Configuration
9.3.2
After SmartDispenser
as either "Priming Only" or "Dispensing
Only", select "Serial Interface" as a means of
transferring step count. Connect the units
via a 9-pin Null Modem Serial Cable.
9.3.3
Perform priming steps with the dispense gun and
syringe barrel in the same manner described in
steps 9.2 through 9.2.3. When completed
tap/click the Prime Done button.
NOTE:
After the data has been transferred and accepted
by the "Dispensing Only" unit the step count will
automatically re-set to 0.
26
Fishman Corporation
27
Fishman Corporation
units have been setup
®
USA Toll Free 1-800-433-2115
USA Toll Free 1-800-433-2115
Prime
Done