Table of Contents
Advertisement
—Navigation keys
You can change the definitions for the four directions on the navigation key. Scroll to Up, Down,
Left or Right, indicated by an arrow, and then:
press
/
to change the setting, or
press [Select] to display a function list, select a function and press [OK].
—Hotkeys
You can only program keys 2 to 9 as 0 (select language),1 (call voice mailbags), # (access
WAP) and * (enter international prefix) are predefined and locked, preventing reprogramming.
Depending on your service provider, other hotkeys may be predefined and locked.
1
Select a key from 2 to 9 and press the left soft key.
2
Browse the list to select the function you wish ton associate with this key. Press the left soft
key, to confirm your choice.
To use the hotkeys, simply press and hold the key corresponding to the function you want to
launch or to the number you want to dial while in idle mode.
Network Services
The function enables you to make networking settings. Press [1]-[2] to access Network Info
and Preferred network respectively.
Network Info
—Network select: enables you to make network settings in the following ways: select Auto
Selection and the phone automatically selects one of the mobile networks available in your
area, or you can select a network from the network list by yourself.
—Frenqucency: Press [Select] to select the desired frequency from GSM900/DCS1800 and
1900.
Preferred Network: enables you to set up to 10 preferred networks in the following ways:
press [Insert] to display a network list, select a network, and then press [OK] to insert the
network in the selected place on the list; or press [Append] to display a network list, select a
network, and then press [OK] to add the selected network at the end of the network list.
You can press [Delete] to delete the selected network from the preferred network list you
have set.
Phone Data
On the Phone Data screen, there are three available options as follows:
Phone Info: enables you to view or modify the phone information (own number and IMEI).
Memort status: shows the percentage of memory used/free, and the phone's total memory in
KB.
Serial Number: displays the serial number of the phone.
Switch on/off
Switch on time
A checkbox is displayed to enable you to select the function. Press [Select] to select Switch on
and then you can enter the switch on time in the format of hh:mm.
Switch off time
A checkbox is displayed to enable you to select the function. Press [Select] to select Switch off
Advertisement
Table of Contents
