Table of Contents
Advertisement
the defaut being Off.
Default settings
This menu is used to reset all the values to the default ones.
Frame
To choose a frame and apply to the picture you take. This function is only available in
Wallpaper mode.
Own pictures
This menu allows you to access Own pictures folder to view the pictures taken by the built-in
camera.
Comic photo
Set this option to On to take a 4-in-one picture.
Burst capture
Set this option to On to take burst pictures. This option is only available for VGA/QVGA/
Wallpaper modes. In VGA mode, you can take at most 10 continuous pictures; in QVGA and
Wallpaper modes, you can take at most 15 continuous pictures. You can set the number of
pictures from 4 to the top limit.
Effects
To choose an effect and apply to the pictrure you take: Normal, B&W, Blue, Green, Brown, Red,
Negative and Oil.
Vision mode
To choose one of the two modes available: Normal and Night. The default mode is Normal.
Self-timer
Set this option to On to activate it and press [OK] to go back to the preview mode to take a
picture in self-timer mode.
Take a picture
1
If the self-timer option is set to be Off, and once the camera is activated, press the
camera key or the left soft key (when the flip is open) to take a picture.
2
If the self-timer option is set to be On, the self-timer icon will be shown on the screen,
press the camer key or the left soft key (when the flip is open) to take a picture in the
Advertisement
Table of Contents
