Disassembly; Removal Of The; Removal Of The Ha-Board; Removal Of The Slot Block - Panasonic TH-37PG9W Service Manual

6 Disassembly

· To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
· and marks indicate screw positions.
6.1. Removal of the Back Cover
1. Remove the screws (×6
remove the Back Cover.
6.2.

Removal of the HA-Board

1. Remove the 4 screws(D) and then remove the HA Terminal
Block.
2. Remove the 4 screws(E).
3. Remove the 2 screws(F) and then remove the HA-Board.
6.3.

Removal of the Slot Block

1. Disconnect the couplers (J1, J2, J3, J4, J5, J6, J7, J8, J10,
J15).
2. Remove the 4 screws and then remove the Slot Block.
, ×6 , ×14 , ×8 ) and then
9
TH-37PG9W / TH-42PG9W