Panorama Mode - Kodak Pixpro FZ102 User Manual

Panorama Mode

Panorama Mode allows you to create
a panoramic picture. The camera will
automatically compose a panoramic
picture using the individual shots that you
take.
Follow these easy steps to create a
panoramic picture:
1. Press the
mode ( ).
2. Press the direction buttons to select
a desired shooting direction. Should
you not select a direction, the default
shooting direction is "right". 2 seconds
later, the camera is ready to take
pictures. You can also press the
button or press the shutter button
halfway down to be ready to take
pictures.
3. Compose the first view of the
panoramic picture on the LCD and
press the Shutter button to capture the
image.
24
button to select panorama
4. After the first shot is taken, the
semi-transparent image of the first
shot will appear at the edge of the
screen. You can use this image to
compose and align your picture
before you press the Shutter button to
capture and finish manual stitching.
5. If continuous pictures are less than 4
shots, press the
will automatically stitch the pictures
together. Press the playback button to
enter playback mode to see the effect.
6. If you take 4 pictures, the camera
will automatically stitch the pictures
together. Press the Playback button
to enter Playback mode to see the
finished effect.
button,the camera