Lcd Display - Sullair 3007 Operators Manual & Parts Lists

SECTION 5

5.3 LCD DISPLAY

The display's normal view shows the compressor
package's discharge pressure, internal temperature, and
the operating mode. The modes are MANUAL, OFF,
AUTOMATIC, or FAULTED.
Figure 5-2:
Refer to Figure 5-2 and Figure 5-3. The lower line is
occasionally interrupted to describe the compressor
package's operating state.
Figure 5-3:
Refer to Figure 5-4. If a machine fault occurs, the red fault
" " indicator will light up, and the display will indicate that
a fault has occurred.
Figure 5-4:
Refer to Figure 5-5. The lower line periodically will display
the cause of the fault. Refer to service instructions to
correct the cause. Press the Stop pad "
controller.
Figure 5-5:
58
Refer to Figure 5-6. Press the Down arrow "
additional information about the compressor. The upper
line will indicate "Compressor Status" and the name of the
temperature, pressure, or other measurement. The lower
line indicates the present reading.
SA_0000005R01
Refer to Figure 5-7. When you continue beyond the status
information, the display will show a list of control settings.
The upper line will indicate "Show Setting" and the name
of the setting. The lower line shows the present value.
SA_0000004R01
Refer to Figure 5-8. To change the setting, press the Enter
pad "
mode with reverse characters. Use the Up "
" " arrow keys to change the setting, and press Enter
again to save the new setting.
SA_0000001R01
Refer to Figure 5-8. If there is no keypad activity, the
" to reset the
display will return to normal view in about one minute. If
the Start or Stop buttons are pressed, the display also
returns to normal view. If either of these occur, the setting
will not be altered.
If there are any warnings or recommended service
instructions, these will be periodically displayed on the
normal view.
The list of displays may be navigated from either direction
SA_0000002R01
by using the Up "
example, to change language from normal view, press the
Up arrow pad once, press the Enter key "
language, and press Enter again. The number of displays
varies with compressor model, but will follow this pattern.
3000-4500 Operator's Manual and Parts List
Figure 5-6:
Figure 5-7:
". The display indicates that you are in a change
Figure 5-8:
" or Down "
" to display
SA_0000003R01
SA_0000006R01
" or Down
SA_0000007R01
" arrow keys. For
", select your
SULL AIR
® ®