How To Initialize The Blu-Ray Disc Home Theater - Philips HTS3251B/F7 Service Manual

HOW TO INITIALIZE THE BLU-RAY DISC HOME THEATER

[HTS3251B/F7]
To put the program back at the factory-default,
initialize the BD player as the following procedure.
Note: By initializing, network is reset to disconnected
state and "Network Service Disclaimer"
appears on the screen.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the
remote control unit in that order.
Fig. a appears on the screen. All VFD lights.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
ESN : ***********************************
DRM : OK
EEPROM CLEAR <STOP>
Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
ESN : ***********************************
DRM : OK
EEPROM CLEAR : OK
EEPROM CLEAR <STOP>
Fig. b
Fig. c
5. To exit this mode, press [
EXIT <POWER>
EXIT <POWER>
] button.
1-6-1
[HTS3051B/F7]
To put the program back at the factory-default,
initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the
remote control unit in that order.
Fig. a appears on the screen. All VFD lights.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
EEPROM CLEAR <STOP>
Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
EEPROM CLEAR : OK
EEPROM CLEAR <STOP>
Fig. b
Fig. c
5. To exit this mode, press [
EXIT <POWER>
EXIT <POWER>
] button.
E1S00/2INT