Stihl MSE 141 C Instruction Manual page 17

6 IMPORTANT SAFETY INSTRUCTIONS
6.6.3 Working Conditions
WARNING
￭ Operate your chain saw only under good visibility during
favorable daylight conditions.
– Postpone the work if the weather is windy, foggy,
rainy or inclement.
– Never cut near power lines.
￭ Your chain saw is a one-person machine.
– Do not allow other persons in the general work area.
– Switch off the motor immediately if you are
approached.
￭ To reduce the risk of injury to bystanders and
unauthorized users:
– Never leave the chain saw unattended when it is
connected to the power supply.
– Switch off the chain saw, engage the chain brake
and disconnect from the power supply during work
breaks and any other time the chain saw is not in
use.
￭ Sparks generated from the operation of the chain saw may
be capable of igniting combustible gases, liquids, vapors,
dusts or other combustible materials and substances. To
reduce the risk of fire and explosion:
– Never operate the chain saw in a location where
combustible gases, liquids, vapors, dusts or other
combustible materials and substances are present.
– Read and follow recommendations issued by
government authorities (e.g., OSHA; for Canada:
CCOHS) for identifying and avoiding the hazards of
combustible gases, liquids, vapors, dusts or other
combustible materials and substances.
0458-729-8621-A
￭ If a rotating saw chain strikes a rock or other hard object,
sparks may be created, which can ignite flammable
materials under certain circumstances. Flammable
materials can include dry vegetation and brush,
particularly when weather conditions are hot and dry.
– When there is a risk of fire or wildfire, do not use your
chain saw around flammable materials or around dry
vegetation or brush.
– Contact your local fire authorities or the U.S. Forest
Service (for Canada: Canadian Forest Service) if
you have any question about whether vegetation
and weather conditions are suitable for the use of a
chain saw.
￭ Use of this chain saw (including sharpening the saw
chain) can generate dust, oil mist and other substances
containing chemicals known to cause respiratory
problems, cancer, birth defects and other reproductive
harm.
– Consult governmental agencies such as EPA,
OSHA, CARB and NIOSH (for Canada: ECCC,
CCOHS and PHAC) and other authoritative sources
on hazardous materials if you are unfamiliar with the
risks associated with the particular substances you
are cutting or with which you are working.
￭ Inhalation of certain dusts, especially organic dusts such
as mold or pollen, can cause susceptible persons to have
an allergic or asthmatic reaction. Substantial or repeated
inhalation of dust or other airborne contaminants,
especially those with a smaller particle size, may cause
respiratory or other illnesses. This includes wood dust,
especially from hardwoods, but also from some softwoods
such as Western Red Cedar.
– Control dust (such as saw dust) and mists (such as
oil mist from chain lubrication) at the source where
possible.
– Always work with a properly sharpened saw chain,
which produces wood chips rather than fine dust.
– To the extent possible, operate the chain saw so that
the wind or operating process directs any dust, mist
or other particulate matter raised by the chain saw
away from the operator.
English
15