Display - Alfa Romeo MiTo 2016 Owner's Handbook Manual

DISPLAY

The car is equipped with a reconfigurable
multifunction display that, according to
the previously applied settings, will show
useful driving information.
With the ignition key removed, the
display lights up and shows the time and
total odometer reading (in km or miles)
for a few seconds when a door is
opened/closed.
RECONFIGURABLE MULTIFUNCTION
DISPLAY
The following information is shown on the
display (example given in fig. 41 ):
41
1: Time
2: Area reserved for messages
(information, settings, etc)
3: Milometer (total distance covered
in km or miles).
42
4: Car status indications (e.g. doors open,
possible ice on road, etc.)/Start&Stop
function indication (where
provided)/Gear Shift Indicator (where
provided)
5: Headlight alignment position (only with
dipped beam headlights on)
6: External temperature
The turbocharger pressure will appear on
some versions when "DYNAMIC" driving
mode is selected (see "Alfa DNA system"
in this chapter).
GEAR SHIFT INDICATOR
(where provided)
The GSI (Gear Shift Indicator) system
advises the driver to change gear through
a special indication on the display.
Through the GSI, the driver is informed
that the gear change will allow a
reduction in fuel consumption.
Therefore, for driving oriented towards
reducing fuel consumption, it is advisable
to stick to "Natural" or "All Weather"
mode and to follow the suggestions of
the Gear Shift Indicator, where traffic
A0K0600C
conditions permit.
When the SHIFT UP icon
the display the GSI suggests the driver to
up-shift, whereas if the SHIFT DOWN
icon is displayed, the driver is advised
to down-shift.
The indication in the instrument panel
remains on until the driver shifts gear or
the driving conditions go back to a
situation where gearshifting is not
required to improve consumption.
CONTROL BUTTONS
"+" or
system) fig. 42: to scroll upwards through
the screen and the related options or to
increase the displayed value.
SET/ : press briefly to access the
menu and/or go to next screen or confirm
the selection. Hold down to go back to
the standard screen.
"–" or
system): to scroll downwards through the
screen and the related options or to
decrease the displayed value.
is shown on
42
IMPORTANT The control buttons
activate different functions according to
the following situations:
(versions with Start&Stop
(versions with Start&Stop
A0J0302C