Samsung RVMC060GDM0 Technical Manual page 240

. Installation
2. Panel
4) Install the air flow blade.
4-1 Fix the right part of the blade to the indoor unit.
4-2 Fix the other side of the blade.
IMPORTANT
4-3 Fix the middle part of the blade by pushing slightly the
middle tab in the indoor unit.
5) Open the electrical component box by removing screws,
then connect cables between the electrical component box
and the panel.
IMPORTANT
6) Fix the panel by fastening 4 bolts; the bolt can be fastened
up to 15mm.
If there is a gap between the panel and the ceiling, adjust
the height of the indoor unit. Unless adjust the height,
dew may form and drip from the gap.
7) Reinstall the front grille.
If the direction is incorrect, the blade will not be
inserted smoothly. Check that prominence of the
right side has a small rectangular groove.
Be careful about the color of cables not so that they will
be mixed up.
Indoor unit
Standard
length:20mm
Panel
16
Insulation
Indoor unit
Panel
Must fit tightly against the ceiling without any gap