Motorola iM1100 User Manual page 14

LOGO HERE
3. In the Remote Access Setup window, click Add.
If a modem is already inserted in the same COM port as the
iM1100 modem, click "Remove" to remove it and then
click "Add".
4. In the RAS Device window, ensure the COM port for your iM1100
modem is selected. Click OK.
5. The Remote Access Setup window now shows the added COM port.
Click Continue.
6. In the Network Services Selection window, click Close.
7. When the Computer Restart window appears, click Yes.
8. When the Windows banner appears during the computer restart, log on.
The installation will automatically resume. The Setup Complete window
appears.
To complete the installation:
In the Setup Complete window, choose "Yes, I want to restart my computer
now" and click Finish.
Registering Your iM1100 Wireless Modem
Your iM1100 wireless modem must register with your service providers
network before you use it for the first time.
To register your modem after installation, start the Wireless Data Services
software Status Program and connect.
10
N O T E
www.motorola.com/iden