Subaru IMPREZA 2004 Service Manual page 266

SPEED CONTROL SYSTEMS
• LHD MODEL
(A)
(E)
(G)
(I)
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
Accelerator Pedal
(B)
(C)
(D)
(J)
(F)
(H)
SP-00024
SP(H4SO)-6
• RHD MODEL
(A)
(B)
(C)
(D)
(E)
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
Clean and apply grease to the portions indicated in
the figure.
Grease:
SUNLIGHT No. 2 (Part No. 003602010)
E: INSPECTION
1. ACCELERATOR PEDAL
1) Lightly move the pedal pad in lateral direction to
ensure that pedal deflection is in specified range.
2) If excessive deflection is noted, replace the
bushing and clip with new ones.
(G)
(J)
(F)
(H)
(I)
SP-00025