Advertisement
Available languages
Available languages
To install:
1.
Disconnect the sander from
the power source.
2.
Align the indicators
on the
vacuum
adaptor and the
dust bag.
3.
Slide the dust bag forward and
push it onto the adaptor; rotate
the bag clockwise to lock it in
place (Fig. 6).
NOTICE: From time to time, clean
the vacuum adaptor with a dry brush.
ck
/
Adaptor
Indicator
Indicator
To remove:
1.
Disconnect
the sander from the power source.
2.
Grip the dust bag firmly, rotate it counterclockwise
and pull it out from the
tool (Fig. 6).
NOTICE: For longer periods of use, or on large pieces of work, it is advisable to
use a suitable
vacuum cleaner. Attach an 1-1/4 in. or 2-1/4 in. wet/dry-vacuum
hose to the vacuum adaptor.
It is advisable to also wear a suitable
dust mask, as
there may be residual airborne dust particles
in the area.
_,
WARNING:
The dust that is produced
while sanding
can be detrimental
to health, flammable,
or explosive.
Suitable safety measures
are required.
Examples:
Some types of dust known to cause cancer. Always wear a dust
mask, and use the proper dust collection
method: dust box for small volume and
vacuum
connection
for Barge volume dust collection.
SELECTING
THE RIGHT GRADE OF SANDPAPER
Different grades of sandpaper
can be purchased
from the store where you
purchased
the tool. Available
grades are: Coarse, Medium
and Fine.
Use a coarse grit to sand down rough finishes,
medium
grit to smooth the work
and fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine
the
optimum
grades
of sandpaper
for a particular job.
SANDING
This sander can be used for most sanding
operations
on materials
such as
wood,
plastic, metal and painted surfaces.
_,
WARNING:
Do not touch the vents after prolonged
use; the gear box could
be very hot.
14
Advertisement
