Removing A Compactflash Memory Card; Installing A Compactflash Memory Card; A P P E N D I X C Removing And Installing Compactflash Memory Cards - Cisco IAD2801 Series Installation Manual

Table of Contents

Advertisement

Removing a CompactFlash Memory Card

Removing a CompactFlash Memory Card
To remove a CompactFlash memory card from the chassis, perform the following steps:
Do not remove a CompactFlash memory card from the chassis while it is being accessed. The CF LED
Caution
blinks to indicate when flash memory is being accessed. Removing the CompactFlash memory card from
the router while flash memory is being accessed can cause damage to your router.
Step 1
Press the ejector button next to the CompactFlash memory card. The ejector button moves outward so
that it projects from the panel.
Step 2
Press the ejector button again. This ejects the CompactFlash memory card part-way out of its slot.
Step 3
Pull the CompactFlash memory card out of its slot.
Push the ejector button in until the button is flush with the bezel.
Step 4
Caution
To prevent damage to the ejector mechanism, the ejector button must remain pressed all the way in (flush
against the bezel) when not being used to eject a CompactFlash memory card.

Installing a CompactFlash Memory Card

To install a CompactFlash memory card, perform the following steps:
Step 1
Make sure that the ejector button is fully seated so that it does not project out from the panel.
Note
Insert the CompactFlash memory card into the slot until it is fully seated. The ejector button remains
Step 2
flush with the panel.
Note
Caution
To prevent damage to the ejector mechanism, the ejector button must remain fully seated when not being
used to eject a CompactFlash memory card.
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
C-2
If the ejector button is projecting out from the panel, push it in until it is flush with the bezel.
If the ejector button is projecting from the panel after you insert the CompactFlash memory card,
remove the CompactFlash memory card, press the ejector button until it clicks, and reinsert the
CompactFlash memory card.
Appendix C
Removing and Installing CompactFlash Memory Cards
OL-12433-01

Advertisement

Table of Contents
loading

Table of Contents