Table of Contents
Advertisement
2.1.5 Step 5.
Placing the 7208 Tape Drive
The 7208 Tape Drive can be located anywhere that is convenient to your system unit. The only restrictions are the length of the power
cord and the SCSI cable. Recommended locations are:
Away from the floor
In a horizontal position
Where the tape cartridge can be easily inserted
Where the liquid crystal display (LCD) can be easily viewed (for more information about the LCD, see "Liquid Crystal Display" in topic
3.3)
Where the airflow around the unit is not obstructed
To place the 7208 Tape Drive, do the following in sequence:
__ 1. Set the tape drive in the location that you have previously determined.
__ 2. Connect the power cable to the 7208 Tape Drive. (Do not plug it into the electrical outlet at this time.)
The external devices that attach to the system unit can be stacked.
stacking external devices, do not place more than 30 pounds on top of the
7208 Tape Drive.
7208 Model 341 Setup and Operator Guide
Step 5. Placing the 7208 Tape Drive
¦ Copyright IBM Corp. 1997
2.1.5 - 1
When
Advertisement
Table of Contents
