Setup; Equipment Needed For Repeater Setup; Check Points Before Turning On The Repeater - Verizon Smart-Cell User Manual

4.

SETUP

4.1.

Equipment Needed for Repeater Setup

Parameter
Major Component
Additional
Components
Antenna
RF Cable
Testing and
Measuring Equipment

4.1.1. Check points before turning on the Repeater

1) System Power Check
① AC electrical power to the repeater should be 110V, input electricity only after
power verification.
2) Input RF Signal Range
① Optimal
700MHz/850MHz/1900MHz/2100MHz. User should verify input condition of
Donor ANT. If the input RSSI exceeds -27dBm, then external attenuators should
be used.
Item
Smart-Cell Repeater
WALL Mounting Bracket
CD which contains User Manual
V.1.0 and Installation Guide V.1.0
Ethernet Cable 6.6ft (2m)
Ground Cable 6.6ft (2m)
Ground Sems Screw M4 x 8mm
Bracket Sems Screw M6 x 10mm
Lag Screw 12.7mm x 50.8mm
FEU-AMP unit cable
FEU-Wall Bracket cable
Donor ANT
Server ANT
Antenna connection Cable
Spectrum Analyzer
input RSSI into
Quantity
1 EA
1 EA
1 EA
1 EA
1 EA
4 EA
4 EA
4 EA
8 EA
2 EA
1 EA
1 EA
TBD
1 EA
the repeater is
18
Verizon User Manual
Smart-Cell Repeater
Remark
Provided by GST
Provided by GST
Not Included
Not Included
Not Included
-57dBm ~ -27dBm for