Table of Contents
Advertisement
BASIC OPERATION
To wind through the tracks keep the SEL button pressed in the
for about 2 seconds. FF X2 appears in the display. Operating the SEL button
again, the speed of rapid forward/reverse changes according to the disc
as follow:
DVD/VCD/CD/MP3:
Normal Playback 2x
b) In Radio Mode:
Move the SEL button in the direction of
manually. Keep the SEL taste pressed down in the
start the search for a radio station automatically.
12. MOD BUTTON
Press it repeatedly to select TV, AUX IN , RADIO and DISC mode.
During the USB playback, you can press STOP button and then press GOTO
button to select the DISC mode.
13.
(EJECT) BUTTON
Press this button to insert and eject the Disc . The operating unit swings down-
wards. Insert the Disc with the labelled side facing upwards gently into the CD
slot until the device draws in the CD/DVD automatically. The operating unit will
automatically swings back to the normal position.
14. RESET BUTTON
RESET button is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for the
following reasons:
A. Initial installation of the unit when all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Note:If press RESET button , the unit can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
15. IR (infrared)
Sensor for the remote control.
16. AUX IN SOCKET
T
he operation of the AUX , please see page 15.
17. USB CONNECT LINE SOCKET
The operation of the USB, please see page 17.
18. TFT Display (liquid crystal display)
The operation of the TFT, please see page 16.
4x
8x
16x
or
in order to set a radio station
13
or
direction
or
direction in order to
Advertisement
Table of Contents
