V-Chip - JVC AV-48WP34 I'Art Pro User Manual

Channel Guard Message
When a viewer attempts to watch a guarded channel, this message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad (see "Set Lock
Code" - page 35). If the wrong code is entered, the
message INVALID LOCK CODE! will flash on the
screen. The channel cannot be accessed until the
correct code is entered.
• Once a channel has been unlocked, it will
remain unlocked until the
television is turned off.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 30 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Press the M
To V-CHIP
π †
è
To operate (Lock icon
Press Z
ERO
è
To turn V-Chip ON or OFF (V-Chip
must be turned ON for rating settings to
operate)
To move to SET US TV RATINGS,
π †
SET MOVIE RATINGS, or
SET CANADIAN RATINGS (see following
pages for descriptions of each item)
button
ENU
will appear)
to access the V-Chip menu
Initial Setup
�������������������������
��������������
�������������������������
������������������������
�������������������
���������������������������������
������
�������� ��
��������� �� ��������
�������������������
��������������������������
��������������������������
��������� ����
������
��������������
������������
������������������
����
29