This printer has a printing position adjusting function to adjust the lateral and longitudinal printing positions, the bidirectional printing position of the printhead

mounted on the carriage, and the media feed amount.

The printing position can be adjusted in two ways: "automatic adjustment" by which the multi sensor installed at the lower left of the carriage reads the printing

position adjusting pattern and "manual adjustment" by which a print position adjusting pattern is printed with the printing conditions changed little by little to allow

the user to enter the visually checked adjustment value from the operation panel.

Printing position adjustment requires A4-size or larger roll media or cut sheet.

2.2.5 Head Management

iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S

This printer has a nozzle check function to detect any non-discharging nozzle. When a non-discharging nozzle is detected, the printer performs the print head clean-

ing operation. If the problem persists after completion of the print head cleaning operation, the non-discharged nozzles are automatically backed up by other nozzles.

2.2.6 Printhead Overheating Protection Control

iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S

This printer performs printhead overheating protection control when an abnormally high temperature is detected in the printhead.

The printhead can overheat, for instance, when the print operation continues for some time with no ink supplied to the nozzles.

The overheating protection control function prevents a printhead nozzle from becoming clogged or damaged due to excessive heat.

Overheating protection control is performed based on the temperatures detected by the head temperature sensors in the nozzle arrays. If overheating is detected in

a single nozzle array, overheating protection control is performed at either of the following levels according to the temperature.

Protection level 1:

If the printhead temperature sensor detects a temperature above the limit, the carriage stops at the scan end position printer in the direction of travel according to

the carriage's scan status.

Then, wait control is performed to allow the printhead to cool naturally. When the printhead temperature drops below the prescribed value or 30 seconds have lapsed

since detection of the abnormal temperature, printing resumes.

Protection level 2:

When the head temperature sensor detects an abnormally high temperature, printing stops immediately, the carriage is moved to the home position, and the printhead

is capped. In this case, an error code is shown on the display.

2.2.7 Pause between Pages

iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S

To prevent ink blots form forming, this printer has a "pause between pages" function to hang down the printed paper from the platen to dry it and delivers it after

lapse of the specified wait time.

The user can set the wait time using the printer drive. This function is particularly useful for printing on film-type sheets that requires extra long time to dry.

For borderless printing, 30 seconds of drying time is automatically set.

2.2.8 White Raster Skip

iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S

To improve the printing throughput, this printer has a white raster skip function to skip the carriage scan operation for continuous blank segments in print data.

2.2.9 Sleep Mode

iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S

This printer has a Sleep mode to reduce the standby power.

The printer automatically enters the Sleep mode (Power Save mode) when neither user operation nor data reception occurs for a preset period of time in the online

or offline mode.

The printer wakes from the Sleep mode when the user presses any button on the operation panel or data is received from the host computer.

The time until the printer enters the Sleep mode can be changed from the operation panel. (Default: 5 minutes)

2.2.10 Hard Disk Drive

iPF6200 / iPF6000S / iPF6350 / iPF6300S

This printer features a hard disk drive, which provides the following functions.

- Early release of the host computer

- Error recovery

- Job preservation

- Preserved job print

- Job queue handling

1) Early release of the host computer

Each print job received from the host computer is preserved to the hard disk drive attached to the printer, so the printer can proceed with independent printing,

releasing the host computer before the print job completes.

2) Error recovery

If a print job aborts as a result of any print problem, such as a paper jam or insufficient paper, the printer reloads the print job stored on the hard disk so it can resume

2-24

0012-6498

0012-6499

0012-6501

0012-6502

0012-6504

0012-6505

0013-9239

Table of Contents