Lexus SC430 Quick Manual page 40

■
Programming HomeLink ®
Hold your hand-held transmitter within 3
1
inches of the HomeLink
Press and hold down the desired HomeLink
2
button.
For U.S.A. owners:
3
While pressing the HomeLink
press and hold down the button on the
hand-held transmitter until the indicator
light changes from a slow to a rapid flash.
For Canadian owners:
While pressing the HomeLink
repeatedly press and release (cycle) the
button on the hand-held transmitter every
2 seconds until the indicator light changes
from a slow to a rapid flash.
If your garage door is of the rolling code type:
Press the learn button on the motor-head unit
4
in your garage.
Press and hold the vehicle' s programmed
HomeLink
it. Repeat this step once again. The garage
door may open.
If the door does not open, press and
release the same button once again.
® buttons.
button for 2 seconds and release
®
®
® button,
® button,
40