Certificates And Approvals; Manufacturer's Declaration Rf640T Gen 2 Uhf Tool Tag Version 1 - Siemens SIMATIC RF640T Gen 2 Operating Instructions Manual

SIMATIC RF640T Gen 2

1.7 Certificates and approvals

1.7 Certificates and approvals
1.7.1 Certificates and approvals
Table 1- 3
Certificate
Table 1- 4
Standards
FCC
Federal Communications
Commission
1.7.2

Manufacturer's declaration RF640T Gen 2 UHF Tool Tag Version 1

The plant that manufactured the RF640T Gen 2 UHF Tool Tag Version 1 has an ATEX
quality assurance system recognized by TÜV NORD with notification number
TÜV 96 ATEX 1125 Q. The type test certification for the
RF640T Gen 2 UHF Tool Tag Version 1 is stored by TÜV 07 ATEX 346241.
Manufacturer's address
Siemens AG
Automation and Drives
System Engineering A&D SE
Würzburger Strasse 121
90766 Fürth, Germany.
22
6GT2810-2DC00 - RF640T Gen 2 UHF Tool Tag - Europe
Description
CE Approval to R&TTE directive
For Directive 94/9/EC:
EC type test certification no. TÜV 07 ATEX 346241
Acknowledgement of the quality assurance TÜV 96 ATEX 1125 Q
6GT2810-2DC10 - RF640T Gen 2 UHF Tool Tag - USA/Canada
Passive labels or transponders comply with the valid regulations;
certification is not required.
This product is UL-certified for the USA and Canada.
It meets the following safety standard(s):
UL 60950-1 - Information Technology Equipment Safety - Part 1:
General Requirements
CSA C22.2 No. 60950 -1 - Safety of Information Technology
Equipment
UL Report E 205089
Operating Instructions, 05/2009, J31069-D0197-U001-A2-7618
SIMATIC RF640T Gen 2