Adjusting The Acoustic Signal Volume; Adjusting The Screen Backlighting And Contrast - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader

Hide thumbs Also See for SIMATIC RF310M:

Table of Contents

Commissioning

4.3 Basic settings

4.3.2

Adjusting the acoustic signal volume

The tag functions trigger an acoustic signal indicating whether the operations were

successful or were terminated with an error. You can switch these acoustic

acknowledgements/signals on and off and you can regulate their volume.

Adjusting the volume of the acoustic signals

1. Press the blue key twice in succession so that "BLUE KEY" appears on the right of the

display.

2. Regulate the volume of the acoustic signals using the keys "A" (quieter) and "B" (louder).

Figure 4-3

Specific setting of the acoustic signals

Select "My Computer > Control Panel > Volume & Sounds" on the desktop.

On the "Volume" tab, you can regulate the volume between "Soft" and "Loud" using the bar.

You can also permit or deactivate acoustic signals for different messages by activating the

relevant checkboxes.

4.3.3

You can adjust the brightness of the screen by pressing the following key:

Key

Keys for regulating the volume

Function

Changing the backlighting

Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618

SIMATIC RF310M Mobile Reader

Table of Contents