1b. If Equipped with Culligan Cold Water
Filter: Remove the filter canister from the
Cold Water Filtration System under the galley
sink and discard the filter cartridge.
After emptying the canister, remount it onto
the filter assembly and continue the
Antifreeze Fill Procedure.
Set Up Winterization Valves
2. Drain Water Heater. Turn OFF the Heating
System by using the control panel (located
near the monitor panel).
• Turn the Water Heater Bypass valve
(located beneath driver side dinette seat) to
BYPASS position.
Water Heater Bypass Valve
(Located beneath driver side dinette seat)
• Open the Heating System Drain (Yellow)
Valve.
NOTE: To make sure that all water drains
properly from the water container, place
a big enough vessel underneath the
drainage socket of the drain valve (>2.64
gallons (10 liters)).
SECTION 7 –
PLUMBING
7-19