Table of Contents
Advertisement
Optional Stand
An optional stand is available for the scanner which can be
permanently attached to a wall or countertop. After locating the
stand in an optimal position, the scanner (along with the stand)
can be detached for portable use by lifting the entire unit as
shown below.
Power Supply
1
Some models require
either a Listed Class 2 or Listed LPS power
source which supplies power directly to the unit.
How to Scan
Bar codes can be presented to the scanner while it is resting on
the counter or in the optional stand, or the scanner/mount can be
lifted and held as shown.
Switch Option Shown
*Optional Stand
1. Power Off the Terminal (POT) units do not require a power supply.
®
2
Magellan
1000i
Advertisement
Table of Contents
