Bluetooth Section; Usb Recorder Description; Rear Panel Description - Phonic POWERPOD 415RW User Manual

8. USB IN CONTROL
This knob adjusts the USB Playback level as sent to the main mix.
9. MASTER CONTROL
This adjusts the final level of the Main bus. It controls the Main
bus signal which is output to the speakers.
9

BLUETOOTH SECTION

10. BLUETOOTH ON BUTTON AND INDICATORS
This button turns the Bluetooth function of the Powerpod 415RW
on and off. The LEDs that accompany it indicate the status of
the feature. The LED immediately above the button shows the
feature is turned on while the "WIRELESS READY" LED will light
up when a connection is established between a SmartDevice and
the Powerpod.
11. BLUETOOTH LEVEL CONTROL
This rotary control will adjust the level of the incoming Bluetooth
signal that will be sent to the main mix.
11
10

USB RECORDER DESCRIPTION

The USB Recorder's source signal is taken directly from each
individual input channel. While the recordings are indeed in stereo,
they are also limited by the Powerpod 415RW's circuitry, which is
mono rather than stereo. When playing back a signal, the signal
will pass through the USB In control and then is sent directly to
the main mix. Playback of WMA and MP3 with bit rates of up to
320 kbit/s is possible.
12. DISPLAY
This display will display the track number currently being played.
It also offers play, pause and record indicators as well as the cur-
rent play/record time.
13. USB PORT
Connect your USB flash drive to this input. Once a drive is con-
nected, the files will initiate and the main menu will appear on
screen. Users are advised to format their USB memory sticks with
the FAT-32 file system.
2
8
14. PLAY BUTTON
Push this button to start and stop playback and recording of the
currently displayed track. Starting a track after it is paused will
resume the track from the point at which it was paused (in both
record and playback mode). When in recording mode, push and
hold this button to finalize recordings.
15. BACK/NEXT BUTTONS
Pushing these buttons will allow users to skip back and forwards
between tracks. When the menu is activated, these buttons are
used to scroll through on screen options.
16. STOP/MENU BUTTON
Push this button to stop playback or recording when applicable.
Push and hold the button to access the USB recorder/player's
main menu.
15
14
13

REAR PANEL DESCRIPTION

17. TAPE IN AND REC OUT
The TAPE IN sockets allow cassette recorders or CD players to
be added to the Main output. The RECORD OUTPUT, with RCA
phono sockets, provides signal output to a cassette deck and
home audio equipment. The nominal output level and impedance
are -10dBV/600ohms.
18. POWER CABLE
The Powerpod 415RW features a built-in power cable that can
be connected to an appropriate AC power outlet. Ensure the lo-
cal power levels match those required by your powered mixer.
The unit's required voltage is indicated immediately beside the
power cable.
19. POWER SWITCH
This switches the powered mixer on and off. While turn it on, the
power on blue LED indicator will light up on the master section
of front panel.
16
12
POWERPOD 415RW