Recording still images
To record still images, slide the POWER switch downward to turn on the power and
insert a disc.
1
Set the PLAY/STILL/MOVIE selector to STILL.
2
Press and hold the shutter button
halfway down and check the image.
While the AE lock indicator
flashing, the image is frozen, however, the
image is not yet recorded. When the camera
finishes the automatic adjustments*, the AE
lock indicator
ready for recording.
To cancel the recording, release the shutter
button.
3
Press the shutter button fully down.
The shutter clicks and the image is recorded on the disc. After "RECORDING"
goes off, you can do another recording.
The exposure and focus are automatically adjusted. The focus is not automatically adjusted
when the camera is in manual focus mode.
For the number of images you can record on a disc
See page 47.
18
1
ACCESS lamp
z
(green) is
z
lights up and the camera is
2, 3
AE lock indicator