Using The Wake-Up Timer - Sanyo RM-D500 Instruction Manual

1. If you want to wake up with the radio, tune
in the station. If you want to wake up with
CD, load a disc and adjust the volume level
first.
2. Set the wake-up time. (See "WAKE-UP
TIME SETTING".)
3. Set the ALARM SOUND switch to MUSIC
or BUZZER.
MUSIC: Wake up with the radio or CD.
BUZZER: Wake up with the buzzer.
4. Set the ALARM SELECTOR switch to the
appropriate position:
a) For ALARM 1 to sound, set the
ALARM SELECTOR switch to ALARM
ON 1. The ALARM 1 indicator will be
displayed.
b) For ALARM 2 to sound, set the
ALARM SELECTOR switch to ALARM
ON 2. The ALARM 2 indicator will be
displayed.
c) For both ALARM 1 and 2 to sound, set
the ALARM SELECTOR switch to
ALARM 1+2. The ALARM 1 and
ALARM 2 indicators will be displayed.
When the timer ON time arrive, the CD or radio
or buzzer will sound for approximately 60 min-
utes and then turn off automatically. The wake-
up timer will function every day unless it is
released.
To released the time, set the ALARM SELEC-
TOR switch to ALARM OFF.

USING THE WAKE-UP TIMER

SNOOZE MODE
During the wake-up timer is operating, press
the SNOOZE button. The radio or buzzer
will stop for approximately 6 minutes but will
start again and this will be repeated.
NOTES:
- If the SNOOZE button is not pressed,
the radio or CD or buzzer will sound for
approximately 60 minutes and then turn
off automatically.
- To cancel the snooze mode, push the
SLEEP button for at least twice or set
the ALARM SELECTOR switch to OFF.
8