Adjusting The Clock; Using The Dimmer - Sanyo RM-D500 Instruction Manual

NOTE:
When the unit is first connected to the AC power line, the clock display blinks on the display.
Example: To set "PM 6:30"
1. Set the ALARM SELECTOR switch to ALARM OFF.
2. Press the CLOCK ADJUST button down, push the HOUR or MINUTE button respectively to select
the time.
3. Release the CLOCK ADJUST button.
Note:
The clock starts as soon as you release the MINUTE button.
To select the brightness of display, set the DIMMER switch to NORMAL or DIMMER.

ADJUSTING THE CLOCK

PM

USING THE DIMMER

4