BenQ P Series User Manual page 49

Item
Improves the gray level response time of the LCD panel.
AMA
Sets the time to power off the monitor automatically in
Auto Power
Off power saving mode.
Enables monitor's Sleep mode for power saving.
Sleep
Function
Sets to rotate the OSD menu with the monitor.
Auto Pivot
Sets whether to display the resolution notice of the
Resolution
Notice recommended resolution when a new input source is
detected by the monitor.
Sets the function to be accessed by custom key 1.
Custom Key
1
Sets the function to be accessed by custom key 2.
Custom Key
2
Sets the function to be accessed by custom key 3.
Custom Key
3
Sets the feature or setup menu to be accessed by
Controller
Controller Key 1.
Key 1
Sets the feature or setup menu to be accessed by
Controller
Key 2 Controller Key 2.
Sets the feature or setup menu to be accessed by
Controller
Key 3
Controller Key 3.
Allows the monitor settings to be set through the software
DDC/CI
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
Function Range
•
ON
•
OFF
•
OFF
•
10 min.
•
20 min.
•
30 min.
•
Enable
•
Disable
•
ON
•
OFF
•
ON
•
OFF
• Brightness
• Contrast
• Input
•
Color Mode
•
Color Temp.
•
Gamma
•
Color Gamut
•
Black Level
• /PBP
PIP
•
Standard
•
Rec. 709
•
EBU
•
SMPTE-C
•
Calibration 1
•
Calibration 2
•
Custom 1
•
Custom 2
•
ON
•
OFF
Navigating the main menu 49