Jets Control; Light Control; Summer Timer - HotSpring GGE Owner's Manual

SPA LOCK
To activate the Spa Lock:
• Press the OPTIONS hard button.
• Press the soft button next to Set-up.
• Press the soft button next to Spa Lock Off.
IMPORTANT: The Temperature/Spa Lock icon will be displayed
while the screens are locked.
To deactivate the Spa Lock:
• Press and hold the OPTIONS hard button and the LIGHTS hard
button at the same time for 3 seconds. The spa lock icon will turn off.
IMPORTANT: You can activate the spa lock feature even when
the temperature lock is already on. You do not need to turn off the
temperature lock in order to turn on the spa lock feature. If the
temperature lock was already on when you activate the spa lock, it
will remain on when you turn off the Spa Lock.

JETS CONTROL

The JETS hard button activates the jet pump(s). When the JETS hard
The Jet Pump icon (on the Home Screen) will be displayed until the
button is pressed to turn off the jet pump(s), or after two hours of
continuous operation when the pump(s) is/are automatically shut off by
the control system.
The jet pump(s) will turn themselves off after two hours of continuous
operation to prevent overheating and conserve energy in case you forgot
they were on. The jets can be restarted again with no delay.
IMPORTANT: The jet pumps will not function while the spa lock feature
is activated.
You may also run through the entire jet pump cycle by only using the
JETS hard button as follows:
VANGUARD & ARIA
1st Press = Jet pump 2 on Low
3rd Press = Both jet pumps on
high speed
5th Press = Jet pump 1 on High 6th Press = All pumps off
SOVEREIGN
d
1st press = Jet pump on Low
3rd press = Jet pump OFF
Operating Instructions
When activated, the Spa Lock
feature disables all functions on the
control panel. It prevents others from
tampering with the jets, lights and
temperature settings on your spa.
The control panel will not respond
to any hard or soft buttons when
pushed in Spa Lock mode.
button is pressed, the jets menu
will be displayed on the control
panel with Jet 2 in the Low position
(VANGUARD & ARIA models), the
Jet Pump icon will also display on
the home screen. Press any of the
soft keys to change the jet functions
between high or low speed (when
available), and off.
2nd Press = Jet pump 2 on High
4th Press = Jet pump 2 on
Low, Jet pump 1 on high
2nd press = Jet pump on High
TRIUMPH, PRODIGY & JETSETTER
1st press = Jet pump on High

LIGHT CONTROL

All HOT SPRING spas are equipped with Luminescence Four-Zone
Multi-Color lighting.0
Press the LIGHTS hard button to
activate the Underwater Lighting and
display the screen.
To change the intensity of the spa's
underwater lights:
• Press the soft button next to
Dimmer. There are five (5)
brightness levels plus off.
IMPORTANT: Pressing the LIGHTS hard button will also change
the intensity of the spa's underwater lights when in the Underwater
Lighting menu.
To change the color of the underwater lights:
• Press the soft button next to Color.
The colors are as follows: 1) Blue, 2) Aqua, 3) Green, 4) White, 5)
Yellow, 6) Red, 7) Magenta, 8) Color Wheel On, 9) Color Wheel Off.
To turn off all of the lights:
• Press the soft button next to Lights Off.
Your spa has additional lights that can be turned On and Off, or can
be a different color from that of the
underwater lighting.
To see the Additional Lighting menu:
• Press the soft button next to
Additional Lighting to view the menu.
• Press the soft button next to Bartop to
turn Bartop (top edge of spa) lighting
On or Off.
• Press the soft button next to Pillow to turn Pillow lighting On or Off
(only applicable on spas with pillows).
• Press the soft button next to the Water Feature to turn Water Feature
lighting On or Off (only applicable on spas with water features)
• Press the soft button next to Color to change the color for all the
above water lights that are turned on. The color sequence is the same
as that of the Underwater Lighting menu.
IMPORTANT: To go back to the Underwater Light menu from the
Additional Light menu, press the LIGHT hard button or Back hard
button. When both color wheels are used at the same time, the color for
both underwater and additional lighting will be the same.

SUMMER TIMER

Your HOT SPRING spa is equipped with a Summer Timer. The
Summer Timer can be activated during extremely hot summer months
to maintain water temperatures. Activating the Summer Timer causes
the heater to immediately shut down. The circulation pump will remain
on for approximately 5 minutes pushing water through the heater to
cool it down. Both heater and circulation pump will then remain off
for eight hours. The Summer Timer icon on the Home Screen will be
displayed and will remain displayed for as long as the summer timer is
on. The circulation pump and heater will automatically shut down for the
same eight hours every day until the Summer Timer is deactivated. It is
recommended to activate the Summer Timer in the morning so that the
spa is off during the hottest part of the day and so that the circulation
2nd press = Jet pump OFF
Page 20